How To Install Nano Sim Card

Note:

• Employ a standard nano SIM card. A modified card that is thicker than the standard nano SIM card will not fit properly on the tray and may harm the bill of fare slot.
• The microSD card is optional and sold separately.

1. Hold the phone face up.
2. Insert the tip of the tray squirt tool that came with your telephone—or a modest bent paperclip—into the tray eject hole.

   

   When inserting the squirt tool into the tray eject hole to remove the card tray, do not obstruct the tray to avoid dissentious the eject machinery inside the slot.

   

3. Push the tip all the fashion into the hole until the tray ejects, and then pull the tray out.
4. Do the following to place your nano SIM and microSD™ cards into the tray:

   With the gilt contacts facing downwardly, place 2 nano SIM cards into the SIM 1 and SIM two holders of the tray. Make certain to marshal the cut-off corners to the notches on the holders.

   

   When yous demand to use a microSD card, remove your second nano SIM carte du jour and then place the microSD carte on the SIM two/SD holder. You cannot have both the 2nd nano SIM menu and the microSD card inserted at the same fourth dimension.

   

5. When reinserting the tray, make certain information technology is facing upwardly so that your cards don't autumn out. With the outer card holder between your fingers, steadily slide the tray all the manner into the slot.

   

6. Make sure the tray is fully inserted and doesn't protrude from the slot.

Follow the same procedure to a higher place to eject the tray and remove your cards. Before ejecting the tray, make sure to unmount your microSD card get-go. Come across Unmounting the storage menu.

Source: https://www.htcexodus.com/mea-en/support/exodus-one-s/category_howto/inserting-sim-and-sd.html

Posted by: blackburnfooster.blogspot.com

Share this post